| | Body Frame Interior Hardware | Fuel Tanks | New Corvette Parts | | Power Steering Components | 63-82 Differentials, Suspension, Trailing Arms | | 84-96 Differentials | 84-96 Brake System Components | 1963-1982 Brake System and Related Components New OEM Master Cylinders 1953-1962 Master cylinder assembly 1967-1976 With power brakes, Reproduction of Original $117.00 1967-1976 Stock Replacement $79.00 1967-1976 Without power brakes Stock Replacement $79.00 1977-1982 ALL, Stock Replacement $79.00 1977-1982 Reproduction of Original $117.00 Date Coded Reproduction Master Cylinders Available, Requires Build Date to Order Power Brake Vacuum Booster New Power Brake Boosters, No Cores Required 1963-67 Gold (Shown on Right) $197.00 1968-76 Black $197.00 1977-82 Gold $165.00 NEW Power Brake Booster w/ Master Cylinder Reproduction brake boosters with matched master cylinder, tested as a unit to ensure trouble-free operation and maximum performance. 1963-1967 $264.00 1 1968-1976 1968-1976 Black $284.00 1977-1982 Gold $284.00 Stainless Steel Flex Braided Brake Lines (Shown) $68.00 Set (4) replaces the stock rubber hoses, which deteriorate from the inside, expands and causes a spongy pedal. Rubber Lines $20.00 each Complete Set of Rubber Lines $80.00 Steel T-Arm Rear Brake Line $14.00 each Left or right with spiral armor, preformed stainless ending rust deterioration. Mounts over trailing arm to rear caliper. Preformed Stainless Steel Brake Line Kits Complete Car Sets From $105.00 1963 to 1982 preformed Stainless Steel brake line with all bends made to exact factory specs and all spiral armor in proper locations. Call for correct application and pricing. Caliper 2000 90's Technology 1965-1982 Corvette caliper design is the ultimate Stainless Steel lined brake caliper combined with contemporary O-ring piston design. This piston/seal system, together with sleeved calipers, will eliminate soft pedal due to air pumping. Long term storage is no longer a problem, as the seals will not leak. This design offers superior resistance to induction of dirt and moisture into the caliper, which destroys a stock seal. Pistons are precision crafted from 6061-T6511 aluminum billet, by a computerized Turing Center, and are hard coated. The piston and seal is unconditionally guaranteed to be superior to any system on the market for 1965-1982 Corvettes. * Totally eliminates air pumping * Gives dependability of full floating calipers * Maximizes braking potential * Eliminates brake squeaking * Superior technical design reduces pad wear * Offers less rolling resistance -- pads do not drag * Improves brake feel and response * Completely eliminates leaking brake fluid * Upgrades 65-82 Corvette caliper technology to contemporary standards * Aircraft grade O-ring * Seventeen years successful testing * Satisfaction guaranteed * Lifetime warranty on sleeve, workmanship, piston, and seal * NCRS accepted Caliper 2000 $60.00 each w/exchange* Premium Caliper Kit $295.00 w/ exchange* To make your brake system over-haul easier, kit includes: * 4 Ready to bolt on calipers * 2 Sets PREMIUM organic brake pads (FT & RR) * 8 Mounting bolts and 8 lock washers * 4 Pad retaining pins * 4 Stainless braided flex brake lines (replaces rubber hoses) * D.O.T. Approved * 2 Copper washers for front line Master Caliper Kit $369.00 w/ exchange* Upgrades the premium caliper kit to also include: * New master cylinder * 6 Line clips * 2 Stainless steel rear pre-formed brake lines Premium DELCO Organic Brake Pads $41.00 Set of 4 Top Quality Premium Pad Limited Lifetime Warranty Requires 2 Sets Per Car Emergency Brake Hardware Kit $69.00 For both rear wheels, allows stainless steel components to be installed without removing the axle shafts. Emergency Brake Shoe Set $69.00 Emergency Brake Rear Cable $36.00 Connects both rear emergency brakes to the forward cable, and is a complete replacement. State year. Emergency Brake Front Cable $16.00 Front or Rear Splash Shield $36.00 Exact Reproductions. Left or right, rears shields come with brake shoe pivots. Available in Gold Iradite or Zinc Chromate. '69-'82 Front Spindle Assembly With upper and Lower A-Frames Left or right, OEM steering knuckle, spindle, shield, Bearings , Rotor, Upper and Lower A-Frames with New Ball Joints and Bushings, and Caliper Mounting Bracket W/O Caliper $425.00 Each *Indicates items sold on an exchange basis, and cores must be received first for exchange price. Items also sold outright (no core) at higher price. CP reserves the right to refuse as exchange any damaged cores not suitable for safe rebuilding. Sleeved calipers accepted for re-sleeving. Prices subject to change without notice. |
Since 1975 Specializing in Corvette Parts 1963-1996. Factory Direct U.S. Manufacturer 561-572-5323 Email orders@corvettepartsonline.net |
Since 1975 Specializing in Corvette Parts 1963-1996. Factory Direct U.S. Manufacturer 561-572-5323 Email orders@corvettepartsonline.net |
Delray Beach FL
Delray Beach FL
